Broadway Vapors


  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A



Aromamizer RDTA by Steam Crave

The Aromamizer 
RDTA by Steam Crave is an innovative, rebuildable dripping tank atomizer that features a side tension applied two post design, a unique bottom liquid feeding deck, and two sizes that allows users to pair the Aromamizer appropriately with mods and configurations both large and small. TheAromamizer features direct side airflow to the deck, with 3mm airflow holes in a quad or dual configuration, allowing for tremendous maximal airflow. Airflow can be throttled down with the included dual airhole ring, doubling as a protective guard in the event of accidental tipping. The design allows for independent filling and wicking, with 4 pairs of two liquid feeding channels with filling guards, making filling and refilling easy and simple. The build deck can then be separated and maintained without the need of emptying the tank, providing additional convenience. The build deck features a two post side tension applied design, with each post hole measuring 2mm each and arranged in a vertical stack that makes coil setting incredibly easy. The Aromamizer has a unique liquid feeding system, designed directly into the deck and feeding the coil systems directly from the deck itself. This design allows for viable and effective vertical coil arrangements while also reducing leaking and excessive liquid back pressure. The Aromamizer's drip tip is also designed specifically to reduce possible spitback and enhance flavor experience, as airflow is redirected first horizontally into four channels then refocusing the stream. Offered in two tank capacity variations, the Aromamizer comes in either a 3ml or a 6ml tank capacity, giving users the option to directly pair with needs and desired appearance. A complete integration of innovative, unique, and ultimately incredibly useful features, the Aromamizer RDTA by Steam Crave 

Product Features:

  • 23mm Diameter
  • 3ml or 6ml Variations
  • Quad or Dual 3mm Airflow
    • Direct to Deck
    • Configured via Included Airflow Rings
  • Side Tension Two Post Design
    • 2mm Post Holes
    • Easy Coil Setting
  • Direct to Deck Liquid Feeding System
    • Eliminates Troublesome Channel Wicking
    • Reduces Liquid Travel Distance to Coil
    • Allows for Vertical Coil Configurations
    • Independent Deck and Tank
  • Bottom Fill System
    • Easy to Fill
    • Spill and Overflow Guards
  • Redirected Drip Tip
    • Enhances Flavor
  • PEEK Insulators
  • Silver Plated Contact
  • Knurled Bottom
    • Easily Disassembled
  • Stainless Steel and Glass Construction

Product Includes:

  • One Aromamizer RDTA by Steam Crave
  • Two Airflow Rings
  • Hex Key
  • Extra Glass Tank Section
  • Additional O-Rings and Hex Screws
hidden field



Cthulhu V2 RTA Rebuildable Tank Atomizer by Cthulhu Mod

The Cthulhu V2 RTA is an extremely flexible, all in one 
rebuildable tank atomizer system that includes two types of build decks, a 4.7ml tank capacity, a independent tank and deck design, a top fill system, and a variety of tank and seal options for customization. The Cthulhu V2 features an innovative replaceable build deck system assembled using a pin and slot system with the removable 510 providing tension. This design allows the user to completely change the build deck from the preinstalled single coil styled deck to a dual sidemounted post design with just a flathead screwdriver. Each build deck's airflow is slightly raised, minimizing potential leaking, while simultaneously integrating a juice flow control ring allowing users to finely tune the wicking rate. The dual sidemounted post design features an easy to use side applied tension design, greatly increasing the variety of build configurations possible on the Cthulhu V2. The tank and build deck are also independent from one another, allowing users to access and modify the build deck without needing to drain the tank. The Cthulhu V2 has integrated a top fill system that is reached by unscrewing the 510 drip tip base, and couples with the 4.7ml to provide both all day vape potential and easy refilling. Airflow is fully adjustable, with a maximal intake of 12mm by 2mm. Two tank section options are included, with the glass section preinstalled and the option to use a frosted PMMA tank available. Clear, Red, and Blue Tank Seals can be mixed and matched to provide a customizable look for each Cthulhu V2. With all of these features at an extremely competitive price, the Cthulhu V2 RTA places itself as a stylish, flexible, and extremely capable RTA.

Product Features:

  • 22mm Diameter
  • Dual RBA Decks
    • Single Coil Deck
    • Two Sidemounted Post Dual Coil Deck
    • Removable and Replaceable
    • Raised Airholes to Minimize Leaking
    • Each Deck Features Juice Flow Control
  • Top Fill System
  • 4.7ml Tank Capacity
  • Independent Tank and Deck
    • Easy Rebuilding and Maintenance Without Draining Tank
  • Fully Adjustable Dual Airflow Slots
    • 12mm by 2mm Diameter
  • Adjustable Copper Contact
  • Additional PMMA Tank Section
  • Stainless Steel and Delrin Drip Tips Included
  • Colored Tank Seals for Customization
  • Stainless Steel, Glass, and PMMA Construction
  • Cthulhu Engraving
  • Individually Serialized

Product Includes:

  • One Cthulhu V2 RTA
  • Two RBA Decks
  • Additional Delrin Drip Tip
  • One Set of Blue Tank Seals
  • One Set of Red Tank Seals
  • Screwdriver, Screw and O-Ring Pack
hidden field



Eleaf iStick 40W TC Full Kit

The iStick TC40W Full Kit pairs 
Eleaf's first temperature control based mod with the Eleaf GS Air TC Tank, a compact temperature controlled designedplatform, for a fully loaded complete set. Using Eleaf's new TC (temperature control) module, the iStick TC40W has the capability to fire Ni200 Nickel Coils within a range of 200 to 600 degrees Fahrenheit, greatly fine tuning the user experience. The iStick TC40W has a resistance range of 0.05 to 1.0 ohms in TC mode. A traditional wattage based output is also included, with a range of 1 to 40W, with a minimum atomizer resistance of 0.15 ohms. This gives the TC40W fantastic versatility, and with the easy to read OLED screen and menu navigation, making the iStick TC40W a premier entry level device with an advanced feature set. A 2600mAh battery gives the mod great range, and with it's diminutive size, makes the TC40W portable and powerful. Building upon the legacy of the iStick platform, Eleaf has again created an extremely competitive device in the iStick TC40W with the added value of the very popular GS Air TC Tank.

iStick 40W TC Specifications:

  • Temperature Control Range 100 to 315 Degrees Celsius/200 to 600 Degrees Fahrenheit
    • 0.05 to 1 ohm
    • Lock/Unlock Atomizer Resistance
  • 1 to 40W Output Wattage
    • 0.15 to 3.5 ohm
  • 2600mAh Battery
    • Micro USB Charging Port
  • Stainless Steel 510
  • Spring Loaded Brass Connector
  • Three Button Adjustment
  • Stainless Steel Firing Button
  • OLED Screen
    • Resistance Level Readout
    • Output Voltage Readout
    • Output Wattage Readout
    • Output Temperature Readout
    • Battery Life Indicator
    • Screen Rotation Setting
    • Stealth Mode Capability
  • Low Voltage Protection
  • Temperature Protection
  • Temperature Alert
  • Atomizer Protection
  • Short Circuit/No Atomizer Protection

GS Air Specifications: 

  • 22mm Diameter
  • 31mm Height
  • 3ml Capacity
  • Single Sided Adjustable Airflow
  • Stealth Delrin Drip Tip
  • 0.15 ohm GS Air TC Coil Head
    • Ni200 Nickel
    • Pure Organic Cotton
    • Gold Plated Connection
  • Stealth Delrin Drip Tip
  • Stainless Steel Construction
  • High Quality Glass Tank Section

Product Includes:

  • One Eleaf iStick TC40W Mod
  • One GS Air TC Tank
  • One Micro USB Cable
  • One Manual

Product Recommendations:

  • Temperature Control Output can only be used with appropriate Ni200 Coils.
hidden field



Fiber Freaks Density N2 Cellulose Wick Pack

Produced in Europe and Processed in France

Fiber Freaks Density N2 is an outstanding cellulose wicking material manufactured from plants that features pure flavor delivery, superior absorption and desorption, coupled with longevity to make a superior wicking and building material versus traditional 
Japanese Organic Cotton. Through a process called Lyocell, cellulose is extracted using wood from a sustainable forest, and then modified utilizing a partnership with a university laboratory to create a wick that is completely sterilized, hermetically sealed, and contains no oils or additional products. With a simultaneous focus on environmental impact, the fiber in Density N2 takes 80% less land, 95% less water, and 30% less total carbon footprint to cultivate and manufacture than cotton. This material is found in every BXDC Coil in the SauceCode™ systems!

Product Features:

  • Cellulose Wick
    • Manufactured from plant based sources
  • Increased Capillarity and Capacity
    • Higher Absorption and Desorption Rates
  • Neutrality in Flavor
    • Pure and Clean Flavor
    • Lower Flavor to Flavor Retention
  • Higher Lifespan
  • Each Pack Contains Material for 100 to 150 Coils
hidden field


Innokin iSub Apex Sub-Ohm Tank

The Innokin iSub Apex Sub-Ohm Tank is Innokin's newest flagship revision of the iSub line, integrating an extraordinarily easy top fill system, adjustable airflow, and the new Prism Flavor+ convection airflow system for maximal flavor. The Prism Flavor+ system is designed to draw airflow through the dual raised intakes located in the top half of the barrel, directing airflow into the heated outer chamber then back through the actual iSub coil, delivering a different and unique vape experience that enhances flavor while minimizing leaks. The new iSub Apex also is backwards compatible with all iSub coils, allowing existing iSub users to upgrade their tank without having to keep two different coil architectures on hand. The new Solid Spin Top Fill System makes refilling incredibly easy, allowing users to quickly twist the system and access two top filling ports, with one used to prevent back pressure build-up. The iSub Apex also features an exterior design that ensures a high level of durability while simultaneously allowing users to see the tank capacity. Each Apex also includes a stainless steel drip tip alongside a glass drip tip, with the 510 base providing auxiliary airflow for additional cooling. Peak performance with a highly ergonomic design and a unique Prism Flavor+ airflow system, the Innokin iSub Apex is a perfect tank for flavor chasers.

Product Features:
  • 22mm Diameter
  • 3ml Tank Capacity
  • Solid Spin Top Fill System
    • Clearly Marked for Reference
    • Easy Twist Open
    • Dual 4mm Fill Holes
  • Prism Flavor+
    • Convection Based Airflow
    • Redirects Airflow
    • Enhances Flavor
    • Minimizes Leaking
  • Dual Adjustable Airflow
    • Above Coil Orientation
  • Backwards Compatible with iSub Coils
    • Japanese Organic Cotton
  • Stainless Steel and Glass Construction
  • Stealth Delrin Steel Drip Tip
  • Glass and Steel Drip Tip

Product Includes:
  • One Innokin iSub Apex Tank
  • Two 0.5 ohm Innokin Coils (One Preinstalled)
    • 20 to 35W
  • Additional Glass and Steel Drip Tip
  • Extra O-Rings
  • Quickstart Manual
hidden field



LowPro RDA

The LowPro 
RDA is the shortest atomizer that has been released thus far in the market, measuring an absolutely unbelievable 10mm from base to the start of the widebore drip tip, combining with ample dual and single adjustable airflow, a 3.5mm deep juice well, a unique build deck, and a squonk ready additional center pin. The LowPro takes a unique method to the build and post construction, utilizing a cross deck post system that features negatives milled directly from the outer rim and an isolated positive post. This style enables a plethora of builds, including dual coil and single coil configurations. The positive post is plated in silver to ensure a high level of electrical conductivity. Airflow options maximize at 10mm by 2mm for dual or single airflow configurations, allowing for absolutely tremendous airflow while also being able to be throttled down for flavor centric vaping styles. A Delrin Honeycomb Filter simultaneously reduces spitback while providing airflow disruption, connecting into a 12mm competition widebore tip. Packing in a full feature list into an unbelievable form factor, the LowPro RDA by is the quintessential RDA for extreme stealth and compact set-up chasers.

Product Features:

  • 22mm Diameter
  • 10mm Base to Start of Drip Tip
  • 14.5mm Full Height
  • 10mm Dual Slotted Airflow
    • 10mm x 2mm
    • Single Airflow Option
    • Fully Adjustable
  • 3.5mm Deep Juice Well
  • Deckmilled Negatives
  • Squared Base and Insulator Center Post
  • Silver Plated Positives
  • 12mm Competition Bore Built-In Delrin Drip Tip
  • Delrin Honeycomb
    • Spitback Protection
    • Airflow Disruption
  • Additional Squonk Ready Center Pin
  • The Shortest RDA to Date

Product Includes:

  • One LowPro RDA
  • One Additional Honeycomb Delrin Piece
  • One Squonk Ready Center Pin
  • Additional Screws, and Screws
hidden field



The Matrix Sub-Ohm Dual BVC Tank by High Voltage ups the ante of the Sub-Ohm Tank field once more, integrating a massive 5 milliliter capacity, dual adjustable 14 mm airslots, and an integrated 6.5 mm auxiliary tip airflow! 

Designed in the USA by High Voltage

Introducing the Matrix Sub-Ohm Dual BVC Tank by High Voltage, the newest Sub-Ohm Tank that integrates cutting edge designs to combine to make one of the most advanced and feature loaded tanks in the industry! Starting from the Dual Vertical Coil foundation, High Voltage configured the base of each Matrix coil with rectangular intake holes, increasing airflow rate into each coil tremendously. Paired with the adjustable dual airslots measuring a staggering 14 mm each, airflow passage is efficient and adjustable to allow for unbelievable rates. Each coil features a large juice intake surface area in order to keep the rate of wicking efficiency extremely high to cater to ultra high wattage chain vaping. The Matrix is constructed from high quality Stainless Steel and Pyrex, with the tank, coil, and airflow chambers streamlined in order to accommodate an incredible 5 milliliters within a 22 mm wide profile and competitive height, dwarfing the competitions current capacity. The included competition bore tip also features an adjustable auxiliary airslot measuring 6.5 mm, allowing for secondary cooling to make ultra high wattage vaping cooler and more effective. With an incredible feature set, top level performance, beautiful fit and finish, and a very competitive price, the Matrix Sub-Ohm Dual BVC Tank by High Voltage is an absolute must add to every collection.

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling. 

Product Features:

  • Rectangular Coil Design for Maximum Airflow
  • 0.2 ohm Matrix Coil - 30w to 80w
  • 0.6 ohm Matrix Coil - 30w to 80w
  • Incredible Vapor and Flavor Production
  • Stainless Steel widebore Drip Tip with 6.5 mm wide auxiliary airflow
  • 5 milliliter capacity
  • Stainless Steel Construction
  • Glass Tank
  • 22mm in Diameter

Product Includes

  • One Matrix Sub-Ohm Dual BVC Tank by High Voltage
  • One Matrix Widebore Drip Tip with 6.5 mm auxiliary airflow
  • One 0.2 ohm Matrix Coil (Preinstalled) and one 0.6 ohm Matrix Coil
hidden field

Broadway Vapors

625 Broadway, Suit 140,

San Diego, CA 92101

Phone. 619-431-5792